SNR-CD300 SIM Card Kiosk Dispenser & IC Reader Module
SNR-CD300 is a compact SIM Card Kiosk Dispenser Module – designed for OEM telecom kiosks requiring automated half-size SIM card issuing, contact IC read/write, SAM support and rejected-card collection..
Designed for system integrators developing automated SIM collection terminals, telecom service kiosks and other small-format IC card issuing systems.
Discuss Your Kiosk ProjectReview Integration Specs
SIM Card Kiosk Dispenser Module for OEM Telecom Integration
The SNR-CD300 SIM card kiosk dispenser module is designed for system integrators building automated telecom service terminals. It combines controlled card issuing, contact IC processing and rejected-card collection in one compact hardware assembly, helping simplify OEM kiosk integration.
Controlled Card Issuing
Command-triggered card insertion and independent card ejection or retention, coordinated by the kiosk host controller.
Contact IC Read/Write
Integrated contact IC processing supports ISO/IEC 7816 operation and T=0/T=1 CPU card protocols.
Integrated SAM Slot
One SAM card slot with card status detection supports applicable secure-module workflows.
Rejected-Card Handling
A separate collection box retains rejected or abnormal cards instead of presenting them to the customer.
Device Status Monitoring
Infrared sensors and status alerts help the host application monitor low-card, empty-card and collection-box conditions.
OEM Installation
Metal mounting structure and RS232 control make the module suitable for evaluation in custom telecom kiosk enclosures.
Typical SIM Card Issuing & IC Processing Workflow
In a telecom self-service terminal, the SNR-CD300 performs card transport and supported contact IC operations. The host application controls transaction logic, customer verification and communication with external telecom services.
Customer requests a service; external software verifies eligibility.
Kiosk controller sends the appropriate RS232 command.
Module transports a card from its single hopper to the IC processing position.
Host application performs supported contact IC operations as required.
Card is ejected to the customer or retained in the collection box, subject to the workflow.
Where the SNR-CD300 Fits
Telecom SIM Issuing Kiosks
Self-service terminals for controlled physical SIM card distribution after the operator’s registration or authorization workflow.
SIM Card Collection Stations
Automated pickup points for customers whose SIM card request has already been approved by an external service.
Contact IC Service Terminals
Embedded card issuing and contact IC processing in account registration or other approved service workflows.
Compact OEM Card Systems
Custom membership, campus and service card machines using the specified small-format contact IC cards.
Technical Specifications for Kiosk Integration
Key parameters for preliminary mechanical, electrical and software compatibility evaluation.
| Model | SNR-CD300 |
|---|---|
| Product category | Half-size SIM card dispenser and contact IC card reader/writer |
| Card dimensions | 41.5–42.5 mm (length) × 53.5–54.5 mm (width) |
| Card thickness | 0.7–0.9 mm |
| Card hopper | 1 hopper; at least 100 cards at 0.8 mm reference thickness; 150/250-card options |
| Collection box | 1 box; at least 8 cards at 0.8 mm reference thickness |
| Transport mechanism | Hook-style dispensing, rubber roller transport and motor-driven front insertion/ejection |
| Contact IC functions | ISO/IEC 7816; CPU card T=0/T=1; selected synchronous memory card support |
| SAM | 1 integrated SAM slot with status detection |
| Host communication | RS232 asynchronous half-duplex via PH-3 socket |
| Power | 24V DC ±5%; peak current <3.0 A |
| Detection / alerts | Infrared photoelectric sensors; low-card, empty-card, collection-box alignment/full alerts |
| Operating environment | 0–50°C; 20–90% RH, non-condensing |
| Net weight | ≤1.5 kg |
| Mechanical life | Card issuance >100,000 cycles; IC contacts >500,000 cycles under specified test conditions |
Specifications are drawn from the SNR-CD300 datasheet. Card capacity, communication behavior and IC compatibility must be verified with the final cards, firmware and kiosk installation. Card capacity is referenced to 0.8 mm cards as stated in the detailed technical table.
What to Confirm Before Integrating the Module
Successful card issuing depends on more than the dispenser alone. SNROKIOSK helps integrators review the mechanical and host-control requirements of the complete kiosk.
- Card sample: Confirm size, thickness, material, chip location and contact alignment.
- Cabinet design: Reserve space for card loading, outlet alignment, collection-box removal and service access.
- Power and communication: Validate 24V DC power quality, RS232 wiring and host command behavior.
- Software handling: Monitor low-card, empty-card and collection-box warning states.
- Maintenance: Allow access for roller cleaning and contact inspection.
Recommended Integration Checklist
Before requesting a sample, share:
- Physical SIM/IC card samples or detailed drawings
- Kiosk enclosure dimensions and card outlet location
- Host OS/controller and RS232 integration plan
- Required card read/write and rejection sequence
- Prototype quantity and expected production volume
SIM Card Kiosk Integration FAQ
Can the SNR-CD300 issue SIM cards and read contact IC cards?
Yes. The datasheet specifies half-size card dispensing, SIM reading, contact IC read/write and SAM card operation. Confirm your exact card type, contact layout and protocol before deployment.
Does the SNR-CD300 activate a SIM card with a telecom operator?
No. It handles supported physical card and IC operations. Subscriber registration, operator provisioning and SIM activation require separate software and backend services.
What card dimensions and thickness are supported?
Specified card length is 41.5–42.5 mm, width 53.5–54.5 mm and thickness 0.7–0.9 mm. Provide samples for final compatibility validation.
How does the kiosk controller communicate with the module?
The SNR-CD300 uses RS232 asynchronous half-duplex communication through a PH-3 socket. Integration should follow the applicable protocol documentation.
What happens to a rejected or abnormal card?
The module includes a separate collection box for retained or abnormal cards. The datasheet specifies a capacity of at least eight cards at the reference thickness.
Is there a card-low warning?
Yes. The datasheet specifies an adjustable low-card warning around 21–27 remaining cards, plus empty-card and collection-box status alerts.
Can SNROKIOSK help with OEM/ODM integration?
Yes. Share your card samples, terminal design, host controller, intended workflow and estimated order quantity for a technical review and sample discussion.
Need a Half-Size SIM Card Issuing Module?
Tell us your card format, kiosk layout, required IC workflow and development timeline. We can discuss SNR-CD300 integration documentation, sample evaluation and OEM/ODM requirements.
Contact SNROKIOSK