SIX-HOPPER CARD DISPENSER FOR MULTI-CARD KIOSKS

SNR-CD2604J-6R Six-Hopper Card Dispenser

Six-hopper card dispensing and multi-technology card read/write module for self-service kiosks requiring multiple card inventories, selectable dispensing and controlled reject or recycle handling.

  • 6 independent locked card hoppers
  • 100 cards per hopper, optional 150 cards
  • 1 or 2 reject / recycle boxes
  • Magnetic stripe, contact IC, 13.56MHz contactless and SAM support
  • RS232 and USB 2.0 interfaces
  • Power-failure card protection
SNR-CD2604J-6R six hopper card dispenser for multi-card kiosk integration

Six-Hopper Architecture for Multi-Card Issuing Systems

The SNR-CD2604J-6R is designed for unattended self-service systems that need to store and issue multiple card types or card inventories from a single integrated module.

Six independent card hoppers can be selected by command, allowing the host software to determine which card supply should be used for each transaction.

The module also integrates magnetic stripe, contact IC and 13.56MHz contactless card read/write functions, making it suitable for projects where card dispensing and card data processing must be handled within one workflow.

Reject and recycle handling can be configured with one or two independent locked boxes depending on project requirements.

Key Features

Six Independent Card Hoppers

Six locked removable card boxes allow multiple card types, designs or service inventories to be managed independently.

Command-Selectable Dispensing

The host software can select any hopper by command according to transaction type or backend logic.

Integrated Multi-Technology Reader

Supports magnetic stripe, contact IC, 13.56MHz contactless IC and SAM card workflows.

Configurable Reject / Recycle Boxes

Choose one or two independent locked recycle boxes with multiple capacity options.

Front-End Card Holding

The card can be held at the front-end position before final user release.

Electrically Controlled Safety Gate

The controlled gate supports safer card handling during unattended operation.

Power-Failure Protection

A backup capacitor allows retained cards to be moved toward the exit or reject/recycle box during qualifying power-loss conditions.

Dual Communication Interfaces

RS232 and USB 2.0 interfaces are available for host-system integration.

Status Monitoring

Supports low-card, empty-card, hopper-position and recycle-box status alarms.

How the Six-Hopper Card Issuing Workflow Works

1. User Request

The kiosk identifies the requested card product or service type.

2. Hopper Selection

The host software selects one of the six card hoppers by command.

3. Card Dispensing

The selected card is transported from the hopper toward the reader position.

4. Card Read / Write

Magnetic, IC or contactless card data can be read or written according to the configured card technology.

5. Verification

The host application verifies the card or transaction result before release.

6. Release or Reject

Approved cards are presented at the front-end position, while failed or rejected cards can be routed into the configured reject/recycle box.

Integrated Card Reading and Writing

The SNR-CD2604J-6R combines multi-hopper card dispensing with integrated multi-technology card reading and writing.

Magnetic Stripe Cards

Supports Track 1, Track 2 and Track 3 read/write. Magnetic writing supports Lo-Co 300 Oe and Hi-Co 2750 Oe.

Contact IC Cards

Supports CPU cards according to ISO/IEC 7816, including T=0 and T=1 communication protocols.

13.56MHz Contactless Cards

Supports ISO/IEC 14443 Type A/B including MIFARE Classic S50, S70, Ultralight and compatible CPU cards.

SAM Support

One integrated SAM slot supports secure card applications requiring SAM-based authentication or key management.

Reject and Recycle Box Configuration

The reject/recycle architecture can be configured according to the system workflow.

1 or 2 Recycle Boxes

The unit can be configured with one or two independent locked reject/recycle boxes.

Multiple Capacity Options

Each recycle box supports 30 cards as standard, with optional 50-card or 100-card capacity.

Configuration note: The number and capacity of reject/recycle boxes should be defined according to the expected reject rate, service interval and kiosk maintenance strategy.

For projects involving several card types, software-controlled hopper selection and reject/recycle handling, see our multi-card kiosk architecture guide for the complete integration workflow.

Technical Specifications

Model SNR-CD2604J-6R
Product Type Six-Hopper Card Dispenser / Reader
Hopper Quantity 6
Hopper Capacity 100 cards per hopper; optional 150 cards
Total Card Capacity 600 cards standard / up to 900 cards with optional hoppers
Reject / Recycle Box 1 or 2 independent locked boxes
Recycle Capacity 30 cards standard per box; optional 50 or 100 cards
Card Size 85.47–85.9 × 53.92–54.18 mm
Card Thickness 0.7–0.9 mm
Dispensing Method Hook-style dispensing with fixed card spacing
Card Transport Motor + rubber-roller transport
Issuance Speed 130 mm/s ±10%
Reader Transport Speed 260 mm/s standard; 400 mm/s maximum
Transmission Time Approx. 1.5 seconds to reader position
Card Exit Front-end card holding position
Operating Voltage 24 VDC ±10%, ripple <200 mV
Peak Current <3.0 A
Quiescent Current <0.5 A
Interfaces RS232 / USB 2.0
Operating Environment 0 to 50℃; 20–80% RH
Storage Environment -15 to 55℃; 20–80% RH
Net Weight Approx. 9.0 kg
Self-Test Power-on / operation / command

Reliability and Protection

Reader Life >1,200,000 card cycles
IC Contact Life >1,000,000 cycles
Issuance Life >500,000 cycles
Electronic MTBF >200,000 hours
IC Read / Write Error 1/1000 under specified test conditions
Issuance Error 1/1000 under specified test conditions
Bent Card Tolerance Uniform deformation H < 2 mm
Card Box Security Locked anti-tilt / anti-flip card boxes
Power Failure Protection Backup capacitor; protection triggered under specified low-voltage conditions

Typical Applications

Hotel Key-Card Kiosks

Manage different room-card inventories or credential types in one kiosk.

Card Issuance Terminals

Support automated card issuance where multiple physical card products are required.

Transport & Ticketing Kiosks

Issue different transport or access credentials from separate card inventories.

Membership & ID Issuance

Support multiple membership levels, ID types or credential groups.

Banking & Credential Kiosks

Integrate card selection, dispensing and multi-technology card processing into financial self-service equipment.

Multi-Card Self-Service Systems

Suitable for projects that need several physical card inventories managed by one host application.

Integration Considerations

Define the Six-Hopper Allocation

Define what card type, card design or service category will be loaded into each of the six hoppers before software development begins.

Confirm Card Technology

Identify whether the project requires magnetic stripe, contact IC, 13.56MHz contactless or SAM-based processing.

Define Reject Handling

Confirm whether the kiosk requires one or two reject/recycle boxes and select the appropriate capacity based on the expected workflow.

Confirm Host Interface

The module provides both RS232 and USB 2.0. The host communication architecture should be selected before development.

Reserve Mechanical Space

With six hoppers, internal reader mechanisms and optional dual recycle boxes, the enclosure should provide sufficient installation and maintenance space.

Test the Complete Workflow

Prototype testing should cover hopper selection, card dispensing, read/write operations, card presentation, reject handling, status monitoring and power-failure recovery.

Prototype Integration Checklist

  • Define card type for each of the six hoppers.
  • Confirm 100-card or optional 150-card hopper capacity.
  • Provide actual production card samples.
  • Confirm card thickness between 0.7 and 0.9 mm.
  • Confirm magnetic / IC / RF / SAM requirements.
  • Define magnetic stripe read/write requirements if used.
  • Confirm one or two reject/recycle boxes.
  • Select 30, 50 or 100-card recycle-box capacity.
  • Confirm RS232 or USB host interface.
  • Verify 24VDC power design.
  • Reserve service access for all six hoppers.
  • Test power-failure card handling.
  • Run repeated issuing and read/write tests before pilot production.

FAQ

How many card hoppers does SNR-CD2604J-6R have?

The unit has six independent card hoppers. The host application can select the required hopper by command.

How many cards can each hopper hold?

Standard capacity is 100 cards per hopper, with an optional 150-card configuration.

What is the maximum total card capacity?

Six standard 100-card hoppers provide approximately 600-card capacity. With optional 150-card hoppers, total capacity can reach approximately 900 cards.

Can the machine read and write magnetic stripe cards?

Yes. Track 1, Track 2 and Track 3 read/write are supported, including Lo-Co 300 Oe and Hi-Co 2750 Oe magnetic writing.

Does it support IC and contactless cards?

Yes. The integrated reader supports contact IC cards and 13.56MHz ISO/IEC 14443 Type A/B contactless cards.

Does it support SAM cards?

Yes. One integrated SAM slot is provided for supported secure card applications.

How many reject or recycle boxes can be installed?

The unit can be configured with either one or two independent locked reject/recycle boxes.

What recycle-box capacities are available?

Each recycle box has a standard capacity of 30 cards. Optional 50-card and 100-card versions are available.

What communication interfaces are supported?

SNR-CD2604J-6R supports RS232 and USB 2.0 communication interfaces.

What happens if power fails while a card is inside?

The unit includes backup-capacitor power-failure protection designed to move a retained card toward the exit or reject/recycle box under specified power-loss conditions.

Do you provide integration documentation?

Yes. Available protocol documents, interface information, test resources, mechanical drawings and integration support can be provided for project development.

Engineering Support for Multi-Hopper Card Issuing Projects

SNR-CD2604J-6R is intended for system integration inside unattended self-service equipment.

The final configuration should be evaluated together with the six-hopper card allocation, card technology, reject/recycle strategy, host communication method and kiosk mechanical design.

SNRO can support system integrators with communication documentation, card compatibility evaluation, test resources, mechanical drawings and prototype integration support.

START YOUR MULTI-CARD KIOSK PROJECT

Need a Six-Hopper Card Issuing Module?

Tell us your card types, hopper allocation, magnetic / IC / RF requirements, reject-box configuration, host interface and kiosk installation space.

We can help review the SNR-CD2604J-6R configuration, card workflow and integration requirements before your enclosure and software design are finalized.

Email Call Get Quote